"it works fine with reach why would you mod it any further?"
IntensaFIRE Controller Mods for Xbox 360 and PlayStation 3
Fastest & Easiest Xbox 360 and PlayStation 3 Controller Mods
kEEf's Discussions
Pin for bottom button solder pad (optional button)
1 Reply
The bottom most solder pad for the optional button lifted off while i was soldering in an extra X button to the bottom of the controller for Halo Reach. Does anyone know what pin/leg on the chip I…Continue
Tags: optional, pinout, tac, pad, trace
Started this discussion. Last reply by TXTCLA55 Sep 18, 2010.
kEEf's Page
Gifts Received
kEEf has not received any gifts yet
Latest Activity
kEEf posted a discussionPin for bottom button solder pad (optional button)
The bottom most solder pad for the optional button lifted off while i was soldering in an extra X button to the bottom of the controller for Halo Reach. Does anyone know what pin/leg on the chip I can solder to to jump past the pad? I can't trace it back clearly on my flex board. And can't test with a multimeter now because the pad is gone. Thanks to anyone that helps me out
kEEf replied to Tye Milly's discussion Optional Switch"Supposedly more info on a drop shot mod is supposed to be coming within the next several weeks. Though that would require more than just reprogramming as you would also have to wire into the trace for the crouch button."
kEEf replied to Dan Greffe's discussion If I screw up..."Use nail polish remover and a que tip. You only need very little glue. using too much causes it to flow under the board, leading to all the problems people are reporting."
kEEf replied to Tye Milly's discussion Optional Switch"I just tried this myself (glue is still drying), but tested the button and everything works. There is absolutely NO documentation online for this, I even asked the mod on this site and they didn't have any answers either.
First, which is…"
kEEf replied to John Palazzolo's discussion Modern warfare 2 Q's"mode 1 is the fastest and it is very noticeable that you are using a mod. Use mode 2 for akimbo and mode 3 if you want rapid fire online. Mode 1 for offline.
Remember, while in mod 2, if you switch weapons you won't be able to aim over the…"
kEEf replied to Dylan C's discussion Intensafire not going so well"you probably used too much glue and connected points under the flex board. You can remove the glue with nail polish remover and a que tip. Remove the flex board, remove glue from it and from the controller board beneath. Replace the flex board and…"
kEEf commented on Sam Napolitano's blog post Intensafire Optional Switches"I'm interested. What do the switches do? Is it like a quick toggle on/toggle off linked to a momentary push button switch? I'm looking how to do the prior and/or have a push button that is an unmodified trigger button for actions requiring…"
Comment Wall
- No comments yet!
You need to be a member of IntensaFIRE Controller Mods for Xbox 360 and PlayStation 3 to add comments!
Join IntensaFIRE Controller Mods for Xbox 360 and PlayStation 3
© 2012 Created by Team IntensaFIRE.
Powered by
