IntensaFIRE Controller Mods for Xbox 360 and PlayStation 3
Fastest & Easiest Xbox 360 and PlayStation 3 Controller Mods
Intesafire issue
I recently installed my intensafire. I messed up the first try, so i removed it and tried again later. then it worked for awhile. As i was testing it out, my controller decided to sync radomly and cycle through the modes of the controller and usually try to sync again. I was wondering if anyone could help me with this problem.
Tags: intensafire, issue, mode, random, sync
Views: 19
Replies to This Discussion
-
Permalink Reply by Patrick Mason on -
You have glue on the main-board of the controller, under the intensafire flex-board. It means you applied too much glue to the sync button module.
I have answered this elsewhere on the forum, I will find a link to that post.
Read this post: http://www.intensafire.com/forum/topics/select-button?commentId=409...
If this problem persists after you have done this, I suggest soldering it to the controllers main board.
© 2012 Created by Team IntensaFIRE.
Powered by
