IntensaFIRE Controller Mods for Xbox 360 and PlayStation 3
Fastest & Easiest Xbox 360 and PlayStation 3 Controller Mods
HI NEED A LITTLE HELP.
Hi im austin i am trying to install my intensafire in my controller.(it is my second one btw) i have everything glued in sync button is working fine but no intensafire. it doesnt want to turn on. my first one i had the same problem i thought i just had a defective one. but now that my second one isnt working im like wtf? so any help, suggestions, comments would be helpfull thanks.
Views: 17
Replies to This Discussion
-
Permalink Reply by AndzeeC4 on -
What type of console? And check if you have glued the wrong thing because theirs 2 360 controller types
-
Permalink Reply by austin dessert on
-
i got a cg controller i got it glued in the right places my sync work fine for syncing to the 360 but mod wont turn on
AndzeeC4 said:What type of console? And check if you have glued the wrong thing because theirs 2 360 controller types
-
Permalink Reply by Patrick Mason on
-
The problem is the power connection. If you have access to a soldering iron, I suggest you do that or have a family member do it that can solder. If you don't. You need to retry the gluing process, to remove existing glue you need the two following items, nail polish remover and q-tips. Removing the glue is simple, just dab some nail polish remover onto the q-tip then use the q-tip to gently remove the glue, repeat this process for each connection point.
© 2012 Created by Team IntensaFIRE.
Powered by
